Copyright © 2004 Red Hat, Inc.
Permission is granted to copy, distribute, and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is available at http://www.gnu.org/licenses/fdl.html.
This document may be copied and distributed in any medium, either commercially or non-commercially, provided that the GNU Free Documentation License (FDL), the copyright notices, and the license notice saying the GNU FDL applies to the document are reproduced in all copies, and that you add no other conditions whatsoever to those of th GNU FDL.
Red Hat, Red Hat Network, the Red Hat "Shadow Man" logo, RPM, Maximum RPM, the RPM logo, Linux Library, PowerTools, Linux Undercover, RHmember, RHmember More, Rough Cuts, Rawhide and all Red Hat-based trademarks and logos are trademarks or registered trademarks of Red Hat, Inc. in the United States and other countries.
The Fedora trademark is a trademark of Red Hat, Inc. in the United States and other countries.
Linux is a registered trademark of Linus Torvalds.
Motif and UNIX are registered trademarks of The Open Group.
Intel and Pentium are registered trademarks of Intel Corporation. Itanium and Celeron are trademarks of Intel Corporation.
AMD, AMD Athlon, AMD Duron, AMD K6, and AMD Opteron are trademarks of Advanced Micro Devices, Inc.
Windows is a registered trademark of Microsoft Corporation.
SSH and Secure Shell are trademarks of SSH Communications Security, Inc.
XFree86 is a trademark of The XFree86 Project, Inc, and is pending registration.
Type Enforcement is a registered trademark of Secure Computing Corporation.
FireWire is a trademark of Apple Computer Corporation.
All other trademarks and copyrights referred to are the property of their respective owners.
The GPG fingerprint of the "Fedora Project <fedora@redhat.com>" key is:
CA B4 4B 99 6F 27 74 4E 86 12 7C DF B4 42 69 D0 4F 2A 6F D2
The Fedora Project is a Red Hat-sponsored and community-supported open source project. The results from this project include Fedora Core, which is a proving ground for new technology that may eventually make its way into Red Hat products. However, Fedora Core is not a supported product of Red Hat, Inc..
For more information, refer to the Fedora Project overview later in this document.
The following topics related to Fedora Core 1.92 Test 3 are covered in this document:
Introduction (this section)
Hardware requirements
Overview of this release
Installation-related notes
Package-specific notes
Packages added/removed/deprecated
An overview of the Fedora Project
The following information represents the minimum hardware requirements necessary to successfully install Fedora Core 1.92 Test 3:
CPU:
NOTE: The following CPU specifications are stated in terms of Intel processors. Other processors (notably, offerings from AMD, Cyrix, and VIA) that are compatible with and equivalent to the following Intel processors may also be used with Fedora Core.
Minimum: Pentium-class
NOTE: Fedora Core 1.92 Test 3 is optimized for Pentium PRO (and later) CPUs, but also supports Pentium-class CPUs. This approach has been taken because Pentium-class optimizations actually result in reduced performance for non-Pentium-class processors.
Recommended for text-mode: 200 MHz Pentium-class or better
Recommended for graphical: 400 MHz Pentium II or better
Hard Disk Space (NOTE: Additional space will be required for user data):
Custom Installation (Minimal): 520MB
Server: 870MB
Personal Desktop: 1.9GB
Workstation: 2.4GB
Custom Installation (Everything): 5.3GB
Memory:
Minimum for text-mode: 64MB
Minimum for graphical: 192MB
Recommended for graphical: 256MB
Note that the compatibility/availability of other hardware components (such as video and network cards) may be required for specific installation modes and/or post-installation usage.
The following list includes brief summaries of some of the more significant aspects of Fedora Core 1.92 Test 3:
Fedora Core 1.92 Test 3 includes an implementation of SELinux. SELinux represents a major shift in the way users, programs, and processes interact. By default, SELinux is installed — but disabled — in this release.
You can install Fedora Core 1.92 Test 3 with SELinux enabled by entering selinux at the Boot: prompt when booting the Fedora Core installation program.
Should you decide to enable SELinux, it is strongly recommended that you read the Fedora Core SELinux FAQ:
http://people.redhat.com/kwade/fedora-docs/selinux-faq-en/
Even if you are familiar with SELinux technology, refer to the FAQ for the latest information from the Fedora Core SELinux developers.
In this release, the XFree86™ X11 implementation has been replaced with the X.org Foundation's new official X11R6.7.0 X Window System release. This release is a merger of the previous official X11R6 release, XFree86 4.4.0rc2, and additionally includes a number of updates to Xrender, Xft, Xcursor, fontconfig libraries, and other significant improvements. Refer to the X.org X11R6.7.0 release notes for more information:
http://freedesktop.org/~xorg/X11R6.7.0/doc/RELNOTES.html
More information about X.Org is available at http://www.x.org.
More information about the X.Org X11 implementation is available at http://xorg.freedesktop.org.
Bugs or issues with X should be reported to the project at http://bugs.freedesktop.org or https://bugzilla.redhat.com as appropriate.
Fedora Core is now based on the 2.6 kernel. Therefore, pay particular attention to any kernel-level issues, such as hardware compatibility, differences in performance, etc.
Subversion 1.0 is now included in Fedora Core; the Subversion version control system is designed to be a replacement for CVS and features truly atomic commits, versioning of files, directories and metadata, along with most current features of CVS.
The version of GNOME has changed from 2.4 to 2.6; while using the desktop environment as you normally would, note any problem areas.
The version of KDE has changed from 3.1.4 to 3.2.2; while using the desktop environment as you normally would, note any problem areas.
Being a test release, you will find bugs. When you find a bug, please report it, using Bugzilla:
This section outlines those issues that are related to Anaconda (the Fedora Core installation program) and installing Fedora Core 1.92 Test 3 in general.
For systems capable of booting from a USB device, Fedora Core 1.92 Test 3 includes an image file designed for use with USB pen drives (or other bootable media with a capacity larger than a diskette drive). The file is diskboot.img, and is present in the images/ directory on CD-ROM 1. Use the dd command to write the image.
The ability to use this image file with a USB pen drive depends on the ability of your system's BIOS to boot from a USB device.
The Fedora Core installation program has the ability to test the integrity of the installation media. It works with the CD, DVD, hard drive ISO, and NFS ISO installation methods. Red Hat recommends that you test all installation media before starting the installation process, and before reporting any installation-related bugs (many of the bugs reported are actually due to improperly-burned CDs). To use this test, type linux mediacheck at the boot: prompt.
Memory testing may be performed prior to installing Fedora Core by entering memtest86 at the boot: prompt. This causes the Memtest86 standalone memory testing software to run. Memtest86 memory testing continues until the Esc key is pressed.
NOTE: You must boot from CD-ROM 1 (or a rescue CD-ROM) in order to use this feature.
Certain hardware configurations (particularly those with LCD displays) may experience problems while starting the Fedora Core installation program. In these instances, restart the installation, and add the "nofb" option to the boot command line.
NOTE: Chinese, Japanese, and Korean graphical installations started using the "nofb" option will start in English, and then switch to the appropriate language once the graphical phase of the installation process begins.
Some Sony VAIO® notebook systems may experience problems installing Fedora Core from CD-ROM. If this happens, restart the installation process and add the following option to the boot command line:
pci=off ide1=0x180,0x386
This option allows the installation to proceed normally; any devices not detected due to the use of this option will be configured the first time Fedora Core is booted.
Fedora Core 1.92 Test 3 now supports graphical FTP and HTTP installations. The default for these installation modes remains text-based; however, graphical installations can be enabled by passing "graphical" as a boot-time option.
Note that graphical FTP and HTTP installations increase memory requirements by approximately 64MB, due to the necessity of containing the installer image. However, if you boot the installation program from CD-ROM 1, no additional RAM will be required; instead the installer image will be mounted from the CD-ROM.
Hard drive installations are now graphical by default. There is no memory penalty, as parted now uses a kernel interface that makes it possible to keep partitions mounted on a device while other partitions are being modified.
The firewall configuration screen in the Fedora Core installation program has been simplified. The previous "High", "Medium", and "No firewall" settings have been replaced by a more straightforward on/off-style control. In addition, the default firewall configuration is now stateful, making it more secure. The new design also makes it possible for users of NIS authentication, NFS, and DNS to deploy a firewall with no additional customization required (although customization by specifying port and protocol is still possible).
NOTE: This change also applies to the Security Level Configuration Tool (redhat-config-securitylevel).
Installation via VNC is now supported. To initiate a VNC-based installation, pass vnc as a boot-time option. If necessary, a password can be set by adding "vncpassword=<password>" to the boot-time options. The VNC display will be "<host>:1", where <host> is the hostname or IP address of the system installing Fedora Core.
It is also possible for the Fedora Core installation program to initiate a connection to a listening VNC client. This is done by using the vncconnect boot-time option:
linux vnc vncconnect=<client>[:<port>]
(Where <client> is the hostname or IP address of the system running the listening VNC client, and <port> is an optional port specification that may be specified if the VNC client is not listening on port 5500, which is the default port for this type of connection). The following examples show the how the boot-time option is specified for standard and non-standard ports:
linux vnc vncconnect=pigdog.example.com
linux vnc vncconnect=pigdog.example.com:27910
The system that is to run the listening VNC client must then launch the appropriate software to run the VNC client in its listening mode. For the VNC client supplied with Fedora Core 1.92 Test 3, the following command is sufficient:
vncviewer -listen
In addition, a new kickstart directive has been added to support VNC-based installations:
vnc [--password <password>] [--connect <host>[:<port>]]
(Where --password <password> is an optional parameter for specifying a VNC password, and [--connect <host>[:<port>]] is an optional parameter for specifying the host (and optionally, port) of a system running a listening VNC client.)
NOTE: If you specify any of the VNC-related boot-time options, they will override the corresponding options present in the kickstart file.
There have been issues observed when upgrading Red Hat Linux 7.<x>, 8.0, 9 and Fedora Core 1.92 Test 3 systems running Ximian GNOME. The issue is caused by version overlap between the official Red Hat Linux RPMs (or the ones from the Fedora Project) and the Ximian RPMs. This configuration is not supported. You have several choices in resolving this issue:
1) You may remove Ximian GNOME from your system prior to upgrading to Fedora Core.
2) You may upgrade your system, and then immediately reinstall Ximian GNOME.
3) You may upgrade your system, and then immediately remove all remaining Ximian RPMs, replacing them with the corresponding Fedora Core RPMs.
You must resolve the version overlap using one of the above choices. Failure to do so will result in an unstable GNOME configuration.
The following sections contain information regarding packages that have undergone significant changes for Fedora Core 1.92 Test 3. For easier access, they are organized using the same groups used in Anaconda.
This section contains the most elemental components of Fedora Core, including the kernel.
Experimental DPT I2O SCSI RAID support — Fedora Core 1.92 Test 3 has activated the kernel-2.6 generic I2O layer for stability trials of Adaptec DPT I2O-based SCSI hardware RAID controllers. This controller was previously supported in the 2.4 kernel series by the dpt_i2o driver, which is no longer operational. Testing should be done on Anaconda installations, partitioning, and stress tests with heavy workloads, if possible.
Only perform testing in non-production environments, due to the risk of data loss.
If these test results prove to be positive, I2O may be kept for the final Fedora Core release. Note that the i2o_scsi module has been disabled on x86-64 because it is known to cause deadlocks and crashes; however RAID capability with /dev/i2o/hdX devices has worked in initial testing.
For more information about I2O development visit the "I2O on Linux" page:
Discuss I2O-specific topics on the linux-scsi mailing list; you can find subscription information here:
http://www.linuxhq.com/lnxlists/subscribe.html
You can read the linux-scsi archives here:
This section includes packages that help you manipulate and scan images.
The gimp-perl package has been removed from Fedora Core 1.92 Test 3 because GIMP was updated to 2.0 and the Perl bindings were neither ready nor part of the main package anymore.
Users of Perl scripts in GIMP should install the Gimp Perl module from http://www.gimp.org/downloads/.
This section includes information related to the support of various languages under Fedora Core.
The default Input Method (IM) for Chinese (Simplified and Traditional), Japanese, and Korean has been changed to IIIMF — the Internet/Intranet Input Method Framework. IIIMF is supported as a native GTK2 IM module, and also through XIM using the httx client. IIIMF supports the use of multiple Language Engines (LEs) at the same time; using the GNOME Input Method Language Engine Tool (GIMLET — an applet) it is possible to switch between LEs of different languages inside GTK2 applications.
IIIMF currently defaults to using Ctrl-Space for toggling the input method on and off (Emacs users can use Ctrl-@ instead of Ctrl-Space to set the mark.)
To switch between IIIMF and the legacy XIM input methods, use the im-switch command. Enter the following command for more information:
im-switch -h
This section contains information related to the mail transport agents included with Fedora Core.
By default, the Sendmail mail transport agent (MTA) does not accept network connections from any host other than the local computer. If you want to configure Sendmail as a server for other clients, you must edit /etc/mail/sendmail.mc and change the DAEMON_OPTIONS line to also listen on network devices (or comment out this option entirely using the dnl comment delimiter). You must then regenerate /etc/mail/sendmail.cf by running the following command (as root):
make -C /etc/mail
Note that you must have the sendmail-cf package installed for this to work.
This section contains information related to the X Window System implementation provided with Fedora Core.
There has been some confusion regarding font-related issues under the X Window System in recent versions of Fedora Core (and versions of Red Hat Linux before it.) At the present time, there are two font subsystems, each with different characteristics:
- The original (15+ year old) subsystem is referred to as the "core X font subsystem". Fonts rendered by this subsystem are not anti-aliased, are handled by the X server, and have names like:
-misc-fixed-medium-r-normal--10-100-75-75-c-60-iso8859-1
The newer font subsystem is known as "fontconfig", and allows applications direct access to the font files. Fontconfig is often used along with the "Xft" library, which allows applications to render fontconfig fonts to the screen with antialiasing. Fontconfig uses more human-friendly names like:
Luxi Sans-10
Over time, fontconfig/Xft will replace the core X font subsystem. At the present time, applications using the Qt 3 or GTK 2 toolkits (which would include KDE and GNOME applications) use the fontconfig and Xft font subsystem; most everything else uses the core X fonts.
In the future, Fedora Core may support only fontconfig/Xft in place of the XFS font server as the default local font access method.
NOTE: An exception to the font subsystem usage outlined above is OpenOffice.org (which uses its own font rendering technology).
If you wish to add new fonts to your Fedora Core 1.92 Test 3 system, you must be aware that the steps necessary depend on which font subsystem is to use the new fonts. For the core X font subsystem, you must:
1. Create the /usr/share/fonts/local/ directory (if it doesn't already exist):
mkdir /usr/share/fonts/local/
2. Copy the new font file into /usr/share/fonts/local/
3. Update the font information by issuing the following commands (note that, due to formatting restrictions, the following commands may appear on more than one line; in use, each command should be entered on a single line):
ttmkfdir -d /usr/share/fonts/local/ -o /usr/share/fonts/local/fonts.scale
mkfontdir /usr/share/fonts/local/
4. If you had to create /usr/share/fonts/local/, you must then add it to the X font server (xfs) path:
chkfontpath --add /usr/share/fonts/local/
Adding new fonts to the fontconfig font subsystem is more straightforward; the new font file only needs to be copied into the /usr/share/fonts/ directory (individual users can modify their personal font configuration by copying the font file into the ~/.fonts/ directory).
After the new font has been copied, use fc-cache to update the font information cache:
fc-cache <directory>
(Where <directory> would be either the /usr/share/fonts/ or ~/.fonts/ directories.)
Individual users may also install fonts graphically, by browsing fonts:/// in Nautilus, and dragging the new font files there.
NOTE: If the font filename ends with ".gz", it has been compressed with gzip, and must be decompressed (with the gunzip command) before the fontconfig font subsystem can use the font.
Due to the transition to the new font system based on fontconfig/Xft, GTK+ 1.2 applications are not affected by any changes made via the Font Preferences dialog. For these applications, a font can be configured by adding the following lines to the file ~/.gtkrc.mine:
style "user-font" {
fontset = "<font-specification>"
}
widget_class "*" style "user-font"
(Where <font-specification> represents a font specification in the style used by traditional X applications, such as "-adobe-helvetica-medium-r-normal--*-120-*-*-*-*-*-*".)
This section contains information related to packages that do not fit in any of the proceeding categories.
This section contains information related to the lvm2 package.
The full set of LVM2 commands is now installed in /usr/sbin/. In boot environments where /usr/ is not available, it is necessary to prefix each command with /sbin/lvm.static (/sbin/lvm.static vgchange -ay, for example).
In environments where /usr/ is available, it is no longer necessary to prefix each command with lvm (/usr/sbin/lvm vgchange -ay becomes /usr/sbin/vgchange -ay, for example).
The new LVM2 commands (such as /usr/sbin/vgchange -ay and /sbin/lvm.static vgchange -ay) detect if you are running a 2.4 kernel, and transparently invoke the old LVM1 commands if appropriate. The LVM1 commands have been renamed to end with ".lvm1" (for example, /sbin/vgchange.lvm1 -ay).
LVM1 commands work only with 2.4 kernels. It is not possible to use LVM1 commands while running a 2.6 kernel.
Refer to /usr/share/doc/lvm2*/WHATS_NEW for more information on LVM2.
This section contains lists of packages that fit into the following categories:
Packages that have been added to Fedora Core 1.92 Test 3
Packages that have been removed from Fedora Core 1.92 Test 3
Packages that have been deprecated, and may be removed from a future release of Fedora Core
To reduce the length of the following lists,sourcepackages, and not binary packages are listed.
The following packages have been added to Fedora Core 1.92 Test 3:
alsa-lib — Libraries for Advanced Linux Sound Architecture (ALSA)
alsa-utils — Command-line utilities for ALSA
ant — Platform-independent build tool for Java applications
automake17 — Automake 1.7 compatibility
bcel — Java class file manipulation
checkpolicy — SELinux policy compiler
commons-beanutils — Jakarta Commons Beanutils
commons-collections — Jakarta Commons Collections
commons-dbcp — Jakarta Commons DBCP
commons-digester — Jakarta Commons Digester
commons-fileupload — Jakarta Commons Fileupload
commons-logging — Jakarta Commons Logging
commons-modeler — Jakarta Commons Modeler
commons-pool — Jakarta Commons Pool
cup-v10k — LALR parser generator
cyrus-imapd — Cyrus IMAP implementation
dbh — Disk based hash library
dev86 — A real-mode x86 assembler and linker
device-mapper — Device mapper library
distcache — Distributed SSL session cache
exim — The exim mail transport agent
expect — Split out from tcltk
flac — An encoder/decoder for the Free Lossless Audio Codec
fonts-bengali — Fonts for the display of the Bengali script
gcc34 — GNU Compiler Collection version 3.4
gnome-keyring — A framework for managing user passwords and other secrets
gnome-netstatus — Network status applet
hicolor-icon-theme — Basic directories and files needed for icon theme support
hpijs — A collection of optimized drivers for HP printers
iiimf-le-inpinyin — An IIIMF Language Engine for Simplified Chinese
iiimf-le-xcin — An IIIMF Language Engine for Traditional Chinese
ipsec-tools — Tools for configuring and using IPSEC
iptstate — A top-like display of IP Tables state table entries
ipvsadm — A utility to administer the IP Virtual Server services
jaf — GNU JavaBeans Activation Framework
jakarta-regexp — A 100% Pure Java Regular Expression package
javamail — A protocol-independent API for messaging applications
junit — A regression-testing framework used to implement unit tests in Java
libdv — Software decoder for DV format video
libexif — A library for extracting information from EXIF files
libgnomecups — GNOME library for CUPS integration
libofx — A library for supporting Open Financial Exchange (OFX)
libselinux — SELinux library and simple utilities
libxfce4mcs — Multi-channel settings management support for the XFce4 desktop environment
libxfce4util — Utility library for the XFce4 desktop environment
libxfcegui4 — GTK widgets for the XFce4 desktop environment
libxklavier — A library providing high-level API for X Keyboard Extension (XKB)
lvm2 — Logical Volume Management (LVM) tools
memtest86+ — Stand-alone memory tester for x86 and x86-64 computers
mx4j — An open source implementation of the Java Management Extensions (JMX)
nabi — A simple Hangul X input method
openhbci — A free client-side implementation of Home Banking Computer Interface (HBCI)
openobex-apps — Applications for using the OBEX (Object Exchange) protocol
pcmcia-cs — Utilities for handling PCMCIA devices
perl-Convert-ASN1 — Convert-ASN1 Perl module
perl-LDAP — LDAP Perl module
perl-RPM-Specfile — RPM-Specfile Perl module
perl-XML-LibXML — XML-LibXML Perl module
perl-XML-LibXML-Common — XML-LibXML-Common Perl module
perl-XML-NamespaceSupport — XML-NamespaceSupport Perl module
perl-XML-SAX — XML-SAX Perl module
planner — Graphical project management tool
policy — SELinux example policy configuration
policycoreutils — SELinux policy core utilities
pyparted — Python modules for the parted library
redhat-java-rpm-scripts — A collection of scripts used to perform common tasks for RPM packages containing Java libraries and executables
rhdb-utils — Miscellaneous utilities for PostgreSQL (Red Hat Edition)
selinux-doc — SELinux documentation
servletapi — An implementation of the Java Servlet and JSP APIs
setools — SELinux tools for managing policy
shared-mime-info — The freedesktop.org shared MIME info database
speex — A patent-free codec designed especially for speech.
struts — Framework for building web applications with Java
system-config-bind — A utility for configuring basic Domain Name System (DNS) settings
system-config-boot — A graphical interface for configuring the boot loader
system-config-date — A graphical interface for modifying system date and time
system-config-display — A graphical interface for configuring the X Window System display
system-config-httpd — A graphical interface for configuring Apache
system-config-keyboard — A graphical interface for modifying the default keyboard
system-config-kickstart — A graphical interface for creating kickstart files
system-config-language — A graphical interface for modifying the default system language
system-config-mouse — A graphical interface for configuring mice
system-config-netboot — A graphical interface for configuring diskless environments and network installations
system-config-network — A graphical interface for configuring Ethernet, wireless, Token Ring, ADSL, ISDN and PPP network devices
system-config-nfs — A graphical interface for configuring NFS shares
system-config-packages — A graphical interface for package management
system-config-printer — A graphical interface for configuring printers
system-config-proc — A graphical interface for configuring tunable operating system parameters
system-config-rootpassword — A graphical interface for modifying the root password
system-config-samba — a graphical user interface for configuring Samba shares
system-config-securitylevel — A graphical interface for modifying the system security level
system-config-services — A graphical interface for configuring initscript and xinetd
system-config-soundcard — A graphical interface for detecting and configuring soundcards
system-config-users — A graphical interface for administering users and groups
system-logviewer — A graphical interface for viewing log files
system-switch-mail — A graphical interface for mail transport agent selection
tcl — Split out from tcltk
tclx — Split out from tcltk
tix — Split out from tcltk
tk — Split out from tcltk
tomcat — The official Reference Implementation for the Java Servlet and JavaServer Pages technologies
tvtime — A high quality TV viewer
udev — A userspace implementation of devfs
xalan-j — The Xalan XSLT processor
xerces-j — The Xerces XML parser
xfce4-panel — The panel for the XFce4 desktop environment
xfce-mcs-manager — A multi channel settings manager for the XFce4 desktop environment
xfce-mcs-plugins — A set of plugins for the XFce4 multi channel settings manager
xfce-utils — Utilities for the XFce4 desktop environment
xfdesktop — A desktop manager for the XFce4 desktop environment
xffm — A file manager and SMB network navigator for the XFce4 desktop environment
xffm-icons — Icon themes for the xffm file manager
xfsprogs — Utilities for managing the XFS file system
xfwm4 — A window manager for the XFce4 desktop environment
xfwm4-themes — A set of additional themes for the xfwm4 window manager
xmlsec1 — Library providing support for XML Signature and XML Encryption standards
xorg-x11 — An open source implementation of the X Window System
xrestop — A utility for monitoring application usage of X resources and display them in a manner similar to the top program
The following packages have been removed from Fedora Core 1.92 Test 3:
ami — Replaced by nabi
bonobo-conf — No longer used by any current Fedora Core application
cipe — Not supported by the 2.6 kernel
gcc32 — Used only to compile 2.4 kernel (which is no longer included)
gimp-perl — No longer packaged as part of the GIMP packaging
gnome-vfs2-extras — Now part of gnome-vfs-extras
gtoaster — Equivalent functionality present in nautilus-cd-burner
imap — Replaced by cyrus-imapd
indexhtml — Content added to fedora-release
ipchains — Replaced by iptables
kdoc — not part of current KDE
kernel-pcmcia-cs — Replaced by pcmcia-cs
kpppload — Not part of current KDE release
libcapplet0 — No longer needed; GNOME 1 capplets removed
libgtop — No longer used by any Fedora Core application
libmrproject — No longer needed; mrproject removed
mars-nwe — No longer part of Fedora Core profile
memtest86 — Replaced by memtest86+
mrproject — Replaced by planner
ncurses4 — No longer required
nmh — No longer part of Fedora Core profile
openssl096 — No longer required
readline41 — No longer required
redhat-config-bind — Renamed system-config-bind
redhat-config-boot — Renamed system-config-boot
redhat-config-date — Renamed system-config-date
redhat-config-httpd — Renamed system-config-httpd
redhat-config-keyboard — Renamed system-config-keyboard
redhat-config-kickstart — Renamed system-config-kickstart
redhat-config-language — Renamed system-config-language
redhat-config-mouse — Renamed system-config-mouse
redhat-config-netboot — Renamed system-config-netboot
redhat-config-network — Renamed system-config-network
redhat-config-nfs — Renamed system-config-nfs
redhat-config-packages — Renamed system-config-packages
redhat-config-printer — Renamed system-config-printer
redhat-config-proc — Renamed system-config-proc
redhat-config-rootpassword — Renamed system-config-rootpassword
redhat-config-samba — Renamed system-config-samba
redhat-config-securitylevel — Renamed system-config-securitylevel
redhat-config-services — Renamed system-config-services
redhat-config-soundcard — Renamed system-config-soundcard
redhat-config-users — Renamed system-config-users
redhat-config-xfree86 — Renamed system-config-display
redhat-logviewer — Renamed system-logviewer
redhat-switch-mail — Renamed system-switch-mail
run — Functionality present in schedutils
sndconfig — No longer required by mainstream hardware
tcltk — Package split up into separate expect, tcl, tclx, tix and tk packages
xawtv — Replaced by tvtime
Xbae — Library not used by any application
xcpustate — No longer part of Fedora Core profile
XFree86 — Replaced by the X.Org X11 implementation
Xlt — Library not used by any application
xtraceroute — No longer part of Fedora Core profile
The following packages have been deprecated, and may be removed from a future release of Fedora Core:
devlabel — udev is the recommended solution
kinput2-canna-wnn6 — IIIMF is the recommended input method
licq — Equivalent functionality present in other applications (gaim, for example)
lilo — GRUB is the recommended bootloader
miniChinput — IIIMF is the recommended input method
nabi — IIIMF is the recommended input method
ncpfs — No longer part of Fedora Core profile
skkinput — IIIMF is the recommended input method
xcin — IIIMF is the recommended input method
The goal of the Fedora Project is to work with the Linux community to build a complete, general purpose operating system exclusively from free software. Development will be done in a public forum. The project will produce time-based releases of Fedora Core about 2-3 times a year with a public release schedule. The Red Hat engineering team will continue to participate in the building of Fedora Core and will invite and encourage more outside participation than was possible in Red Hat Linux. By using this more open process, we hope to provide an operating system that uses free software development practices and is more appealing to the open source community.
For more information, refer to the Fedora Project website:
In addition to the website, the following mailing lists are available:
fedora-list@redhat.com — For users of Fedora Core releases
fedora-test-list@redhat.com — For testers of Fedora Core test releases
fedora-devel-list@redhat.com — For developers, developers, developers
fedora-docs-list@redhat.com — For participants of the docs project
To subscribe to any of these lists, send an email with the word "subscribe" in the subject to <listname>-request (where <listname> is one of the above list names.)
NOTE: If you have subscribed in the past to rhl-list, rhl-beta-list, rhl-devel-list, or rhl-docs-list, your subscriptions have been retained.
The Fedora Project also includes an IRC (Internet Relay Chat) channel. IRC is a real-time, text-based form of communication. With it, you can have conversations with multiple people in an open channel or chat with someone privately one-on-one.
To talk with other Fedora Project participants via IRC, access freenode IRC network. Initially, you can use irc.freenode.net as the IRC server, although you may decide to select a server that is geographically closer to you. Refer to the freenode website (http://www.freenode.net/) for more information. Fedora Project participants frequent the #fedora channel, while Fedora Project developers can often be found on the #fedora-devel channel. Some of the larger projects may have their own channels as well; this information can be found on the project pages.
NOTE: Red Hat has no control over the Fedora IRC channels or their content.
( x86 )